Cross Section Drawing  

Mechanical Specifications  

Conductor Material       0.58mm(23AWG)，Solid Bare copper

Insulation Material        1.38±0.08mm, Skin-Foam-Skin Polyethylene

Inner shield                   Individual Al foil (Al face outside)

Outer Shield (Tape)      Polyester/Aluminum shield

Outer shield (Braid)      112*0.12 TC（Tinned copper）

Color Code                   4 pairs，White/Blue,White/Orange, White/Green, White/Brown

Rip cord                        Nylon,630D

Cable Outer Diameter   8.0±0.2mm

Jacket Material              Low-smoke halogen-free(LSZH) or Polyvinyl chloride(PVC)

Jacket Color                  Grey

Bending radius:             10 times the outer diameter of the cable

Electrical Specifications

Bandwidth                                    600MHz

Characteristic Impedance            100±15 ohm

Conductor resistance .Max           9.5Ω/100m

Conductor resistance unbalance .Max  2.5%

Insulation resistance(DC 500V/1 min) .Min  5000MΩ·km

Dielectric strength（C-C, .DC.1min）  1kV

Mutual capacitance .Max             5.6nF/100m

Environmental Specifications  

Operating  Temperature   -20 °C to  +60 °C

Storage  Temperature      -20 °C to  +75 °C

Standards

ISO/IEC 11801(IEC 61156-5)Category 7

EN55022 Class B

IEC 60332-1-2

IEC 60754-2、IEC 61034-1、IEC 61034-2