Cross Section Drawing  

Mechanical Specifications  

Jacket Material                Polyvinyl chloride(PVC)

Conductor Material         23AWG Solid Bare copper

Insulation Material          High-density polyethylene

Cross Material                High-density polyethylene

Shield (Tape) Material:  Aluminum/Polyester

Pairs, quantity                4

Rip cord                         Nylon

Cable Outer Diameter:  6.2±0.2mm

Jacket Color: Grey (Other colors can be customized)

Bending radius: 4 times the diameter of the cable

Tensile strength: ≤ 93N; maximum retention : 25lbs (11.35kg);

Electrical Specifications

Characteristic Impedance                    100 ohm

Characteristic Impedance Tolerance   ±15 ohm

Operating Voltage, maximum              80 V

Rated transmission speed (NVP):       67%

Transmission delay: 530ns / 100m max. @ 100MHz;

Environmental Specifications  

Operating  Temperature                     -20 °C to  +60 °C

Storage  Temperature                        -20 °C to  +75 °C

Standards

International :  ISO/IEC 11801; ISO/IEC 61156-5；EN55022

National :  ANSI/TIA-568-C.2; TIA/EIA-568-B.2

Flammability: Conforms to IEC 60332-1